ARNO - монолитный осевой инструмент 2015 EN
для размещения заказа - info@arno-tools.ru
Recommended cutting data thread milling cutters
Design AFT
ISO Material
P
M
K
N
S
H
General construction steel
Free cutting steel
Case hardened steel, non alloyed
Alloyed case hardened steel
Tempering steel, non alloyed
Tempering steel, non alloyed
Tempering steel, alloyed
Tempering steel, alloyed
Steel castings
Nitriding steel
Nitriding steel
Roller bearing steel
Spring steel
High-speed steel
Cold working tool steel
Hot working tool steel
Steel and sulphured cast stainless steel
Stainless steel, ferritic
Stainless steel, martensitic
Stainless steel, ferritic/martensitic
Stainless steel, austenitic/ferritic
Stainless steel, austenitic
Heat resistant steel
Grey cast iron with lamellar graphite
Grey cast iron with lamellar graphite
Speroidal cast iron
Speroidal cast iron
White cast iron, tempered
White cast iron, tempered
Black cast iron, tempered
Black cast iron, tempered
Aluminium (non alloyed, low alloyed)
Aluminium alloys < 0,5% Si
Aluminium alloys 0,5%-10% Si
Aluminium alloys 10%-15% Si
Aluminium alloys > 15% Si
Copper (non alloyed, low alloyed)
Copper wrought alloys
Special copper alloys
Special copper alloys
Special copper alloys
Short-chipping brass, bronze, red bronze
Long-chipping brass
Thermoplastics
Duroplastics
Fibre-reinforced plastics
Magnesium and magnesium alloys
Graphite
Tungsten and tungsten alloys
Molybdenum and molybdenum alloys
Pure nickel
Nickel alloys
Nickel alloys
Nickel-chromium alloys
Nickel and cobalt alloys
Nickel and cobalt alloys
Heat resistant alloys
Nickel-cobalt-chromium alloys
Pure titanium
Titanium alloys
Titanium alloys
Tempered steel
Strength
[N/mm2]
< 800
< 800
< 800
< 1000
< 850
< 1000
< 800
< 1300
< 850
< 1000
< 1200
< 1200
< 1200
< 1300
< 1300
< 1300
< 850
< 750
< 900
< 1100
< 850
< 750
< 1100
100-350
300-1000
300-500
550-800
350-450
500-650
350-450
500-700
< 350
< 500
< 400
< 400
< 400
< 350
< 700
< 200 HB
< 300 HB
> 300 HB
< 600
< 600
< 850
Vc
[m/min]
80-100
80-100
40-60
40-60
80-120
80-120
150-200
100-150
275-300
180-200
275-300
275-300
350-450
300-400
180-200
< 850
< 1300
< 1300
< 1400
< 1300
< 900
< 700
< 1200
< 45 HRC
46-55 HRC
56-60 HRC
61-65 HRC
65-70 HRC
60-80
50-80
Diameter
3-10 mm
0,03-0,05
0,03-0,05
12-20 mm
0,04-0,06
0,04-0,06
0,01-0,02
0,02-0,04
0,01-0,02
0,02-0,04
0,04-0,06
0,04-0,06
0,06-0,10
0,04-0,06
0,06-0,08
0,06-0,08
0,08-0,15
0,06-0,08
0,06-0,08
0,03-0,04
0,06-0,08
0,08-0,10
0,04-0,05
0,08-0,10
0,06-0,08
0,10-0,12
0,10-0,12
0,03-0,04
0,08-0,10
0,12-0,15
0,12-0,15
0,04-0,05
0,02-0,04
0,04-0,05
0,01-0,03
0,02-0,05
The recommended cutting data are only approximate values. It may be necessary to adjust them to each individual machining application.
360 ARNO®-Werkzeuge | VHM-/PM-HSS Werkzeuge | Solid carbide-/PM-HSS Tools
info@arno-tools.ru
www.arno-tools.ru